钢丝绳抽油杆抽油超冲程分析

通过对钢丝绳抽油杆和常规钢杆振动模型固有频率的分析，从理论上分析了钢丝绳抽油杆和常规钢杆振动形成谐振(超冲程)的奈件；同时讨论了振动阻尼系数对共振的影响关系，从理论上得出了钢丝绳抽油杆在抽油时更易形成超冲程，进而从理论上解释了钢丝绳抽油杆在抽油过程中的泵效较高的事实，进一步解释了当前人们对钢丝绳应用和研究中的一些疑点和难点，为钢丝绳抽油系统的设计和应用提供了重要的理论指导。     

A parametric study of strength reduction factors for elasto-plastic oscillators

Strength reduction factors (SRFs) continue to play a key role in obtaining design forces from elastic design spectra (via response modification factors) in ductility-based earthquake-resistant design. Despite several years of sustained research efforts, it has not been conclusively shown how SRF for a given singledegree-of-freedom structural system depends on various source and site parameters. A parametric study is carried out here for the explicit dependence of SRF spectrum (describing variation of SRF with system period for a given ductility demand) on strong motion duration, earthquake magnitude, geological site conditions, and epicentral distance in case of (non-degrading) elasto-plastic oscillators. For this, scaled response spectra are considered for different combinations of earthquake magnitude, site conditions and epicentral distance, and SRF spectra are generated from 1274 accelerograms recorded in western USA after making those compatible with each of these spectra. It is shown that there is no clear and significant dependence of SRF spectrum on strong motion duration. Further, the parametric dependence on earthquake magnitude, site conditions, and epicentral distance broadly conforms to the trends reported by earlier investigations. In particular, this study confirms that the dependence of SRF spectra on earthquake magnitude should not be ignored. This paper has been contributed in honour of Professor R N Iyengar, Indian Institute of Science, on the occasion of his formal retirement.     

无键联接传动的特点及锥面弹性衬套设计和应用

无键联接在特殊行业和工况中是键联接传递动力和运动的有力补充,介绍了工程上应用的圆弧三边形型面联接、弹性环无键联接、圆柱面过盈联接等几种无键联接传动方式及其工作原理,并分析了各自的性能特点和应用情况。针对无键联接传动的特点、特殊行业和工况的应用实际,设计了锥面弹性衬套无键联接传动结构并介绍了其在工程中的实际应用。     

钢丝绳牵引胶带输送机动力制动系统改造

介绍了钢丝绳牵引胶带输送机制动系统改造方案前、后的对比。     

Theoretical Estimate for the Parameters of Ultrasonic Impulses Excited in Geomaterials by Laser Emission

Using the transfer function method as a base, the analytical relations are obtained, as well as the main parameters are calculated for the ultrasonic impulses of longitudinal, transverse, and the Rayleigh waves excited in geomaterials by laser emission.     

Effect of 3D lip deformations on elastohydrodynamic lip seals behaviour

The numerical simulation of comparative elastohydrodynamic lubrication between axisymmetrical and 3D elastic approaches on the radial lip seals is presented in order to determine the 3D effect of the elastic aspect of the seal lip. Indeed, the consideration of 3D model in other words the circumferential variation of the lip elastic deformation indicated a difference in the deformation distribution of the lip compared to the axisymmetrical approach. Consequently, the results show that the presence of the circumferential variation of the seal lip deformation has a significant effect on the pumping rate values.     

Semi—IPN复合材料的弹性性能和内耗的超声测定

本文用超声浸液法测量了单向纤维增强热塑性树脂及其半互穿聚合物网络(Semi-IPN)复合材料的杨氏模量、剪切模量、泊松比和内耗,并对不同树脂、纤维和Semi-IPN中共混组成比对弹性性能的影响进行了研究。     

弹性直杆热膨胀状态下的非线性振动

以ＫＢＭ法为基础，引进谐波平衡观点来研究弹性直杆热膨胀状态下的非线性振动．通过实例计算表明，弹性直杆热膨胀状态下非线性振动的频率对温度的变化非常敏感．     

泡沫沥青混合料动态性能研究

为更好地模拟泡沫沥青混合料在车辆动载作用下的动态性能，便于与国外相关研究进行比较，采用劈裂法对混合料动态性能进行研究。通过试验研究骨料类型、级配、水泥用量等对泡沫沥青混合料动态回弹模量的影响，总结了泡沫沥青混合料动静模量的关系。     

单线循环客运索道设计参数研讨(续三)

论证客运索道设计中的几个重要参数,建立抱索器钳口夹紧力计算公式,第一次给出钳口夹紧力与钢索金属断面积的比值,并进行了钢索弯曲应力计算公式的推导.